Гига Електроникс ЕООД

bg en

Aaronia Broadband Preamplifiers

A "must have" to get the maximum performance and flexibility out of any SPECTRAN unit.


Bypass RF Pre-amplifier UBBV 1060 BPA (100MHz to 6GHz)


High-End RF Preamplifier up to 6GHz. Works with any brand of Spectrum Analyzers and directly fits to any SPECTRAN. Broadband sensitivity increase by up to 23dB.

The UBBV 1060 BPA can be used anywhere a high gain, low noise amp is called for; digging out those weak shortwave signals or breathing new life into an old analyzer.

Newly designed microwave chips enable the UBBV 1060 BPA to have gain from 50MHz although we only spec the UBBV 1060 BPA from 100MHz. The UBBV 1060 BPA is the ideal general purpose RF amp with low noise and the marvelous bypass-mode, which allows you to adjust to weak or strong signals at the press of a button.

 

40dB Broadband Preamplifier UBBV1

Low Noise Broadband Pre-Amplifier. Directly fits to any SPECTRAN. Also works with any other brand of Spectrum Analyzers. Offers  broad frequency range and increases the sensitivity by up to 40dB.

External, super low-noise 40dB broad band preamplifier. Enables maximum performance particularly when measuring extremely weak signals. Highly recommended for EMC and Pre-Compliance tests like EN55011, EN55022, EN50371 etc.. 

 

Low Noise RF Pre-amplifier UBBV 0910 (9kHz to 6GHz)

High-End RF Preamplifier up to 6GHz. Works with any brand of Spectrum Analyzers and directly fits to any SPECTRAN. Broadband sensitivity increase by up to 30dB.

The UBBV 0910 can be used anywhere a high gain, low noise amp is called for; digging out those weak shortwave signals or putting new life into that analyzer. 
Newly designed microwave chips enable the UBBV 0910 to have gain up to 10GHz although we only spec the UBBV 0910 to 6GHz. The UBBV 0910 is the ideal general purpose RF amp with extremely low noise that you'll wonder how you got along without.

Enables maximum performance particularly when measuring extremely weak signals. Highly recommended for EMC and Pre-Compliance tests like EN55011, EN55022, EN50371 etc.. 

 

40dB RF Broadband Preamplifier UBBV2

High-End RF Preamplifier up to 10GHz. Works with any brand of Spectrum Analyzers and directly fits to any SPECTRAN. Broadband sensitivity increase by up to 40dB.

Problems to read weak signals? Or how about boosting that probe gain or maybe preamping that antenna? 
The UBBV2 broadband preamp is the answer to all these needs as well as many others. You can use the UBBV2 anywhere a high gain, low noise amp is called for; digging out those weak shortwave signals or putting new life into that analyzer especially in the frequency range below 1GHz. 
Since the UBBV2 has such a high compression point of almost 100 milliwatts, you can even use it to boost the power of small micro transmitters! 
Newly designed microwave chips enable the UBBV2 to have gain up to 12GHz although we only spec the UBBV2 to 10 GHz. The UBBV2 is the ideal general purpose RF amp that you'll wonder how you got along without.

Enables maximum performance particularly when measuring extremely weak signals. Highly recommended for EMC and Pre-Compliance tests like EN55011, EN55022, EN50371 etc.. 

 

Broadband Pre-amplifier UBBV DC20

Works with any brand of Spectrum Analyzers and directly fits to any SPECTRAN e.g. the SPECTRAN V5. Broadband sensitivity increases by up to 15dB.

Newly designed microwave chips enable the UBBV DC20 to have gain up to 20GHz. The UBBV DC20 is the ideal general purpose RF amp that you'll wonder how you got along without.

Enables maximum performance particularly when measuring extremely weak signals. 

 

25dB Broadband Pre-amplifier UBBV-NF-25

High-End Pre-amplifier up to 60MHz. Works with any brand of Spectrum Analyzers and directly fits to any SPECTRAN. Broadband sensitivity increase by up to 25dB.

External 25dB pre-amplifier UBBV-NF 25. For optimum performance when measuring weak signals in the frequency range of 1Hz to 60MHz (or 100MHz with lower gain, see graph).

The UBBV NF series provides a high impedance input signal and therefore can be operated even with the antennas of the MagnoTRACKER series or other regular 50 ohm devices. The calibration data of the amplifier are also stored in the Spectrum Analyzer Software "MCS".

The UBBV-NF can be operated via an internal battery (running time approx 3-4 hours) or via the included AC adapter. Via the USB port it´s possible to read the calibration data of the preamplifier, which are stored in the internal EEPROM and so can not be lost.

 

35dB Broadband Pre-amplifier UBBV-NF-35

High-End Amplifier up to 30MHz. Works with any brand of Spectrum Analyzers and directly fits to any SPECTRAN. Broadband sensitivity increase by up to 35dB.

External 35dB pre-amplifier UBBV-NF 35. For optimum performance when measuring weak signals in the frequency range of 1Hz - 30MHz.

The UBBV NF series provides a high impedance input signal and therefore can be operated even with the antennas of the MagnoTRACKER series or other regular 50 ohm devices. The calibration data of the amplifier are also stored in the Spectrum Analyzer Software "MCS".

The UBBV-NF can be operated via an internal battery (running time approx 3-4 hours) or via the included AC adapter. Via the USB port it´s possible to read the calibration data of the pre-amplifier, which are stored in the internal EEPROM and so can not be lost.

Заяви продукт